⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Dickson County › Burns (37029)

Burns, TN (37029): well depth, water level & drilling cost

✓ 364 TDEC records · Dickson County

175 ftmedian well depth
120 ft–240 fttypical depth range
56 ftmedian static water level
5 gpmmedian yield (302 tests)

Pull every recorded well near a Burns (37029) address — $49

How deep are wells in and around Burns (37029), Tennessee?

The median drilled well depth in and around Burns (37029) is 175 ft, based on 349 wells with recorded depths in the state TDEC database. Half fall between 120 ft and 240 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Burns (37029)?

Applying published per-foot rates to the local median depth of 175 ft: drilling and casing alone typically runs $4,375–$11,375; a complete system including pump, pressure tank, and hookup typically runs $10,500–$17,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Burns (37029)?

The median static water level is 56 ft below ground surface (middle half of wells: 40 ft–76 ft), from 166 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 42 100–150 ft 84 150–200 ft 69 200–300 ft 97 300–400 ft 39 400–600 ft 8 600+ ft 2
Looking at a specific property in Burns (37029)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Burns (37029)

Free. Goes to licensed drillers working Dickson County.

Part of Dickson County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.