⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Marshall County › Cornersville (37047)

Cornersville, TN (37047): well depth, water level & drilling cost

✓ 762 TDEC records · Marshall County

225 ftmedian well depth
150 ft–337 fttypical depth range
30 ftmedian static water level
4 gpmmedian yield (399 tests)

Pull every recorded well near a Cornersville (37047) address — $49

How deep are wells in and around Cornersville (37047), Tennessee?

The median drilled well depth in and around Cornersville (37047) is 225 ft, based on 759 wells with recorded depths in the state TDEC database. Half fall between 150 ft and 337 ft; 90% are shallower than 927 ft.

How much does it cost to drill a well in and around Cornersville (37047)?

Applying published per-foot rates to the local median depth of 225 ft: drilling and casing alone typically runs $5,625–$14,625; a complete system including pump, pressure tank, and hookup typically runs $13,500–$22,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Cornersville (37047)?

The median static water level is 30 ft below ground surface (middle half of wells: 15 ft–69 ft), from 387 measurements.

Drilled depth distribution

0–50 ft 16 50–100 ft 63 100–150 ft 104 150–200 ft 108 200–300 ft 172 300–400 ft 128 400–600 ft 77 600+ ft 91
Looking at a specific property in Cornersville (37047)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Cornersville (37047)

Free. Goes to licensed drillers working Marshall County.

Part of Marshall County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.