⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Dekalb County › Dowelltown (37059)

Dowelltown, TN (37059): well depth, water level & drilling cost

✓ 279 TDEC records · Dekalb County

118 ftmedian well depth
80 ft–175 fttypical depth range
52 ftmedian static water level
10 gpmmedian yield (198 tests)

Pull every recorded well near a Dowelltown (37059) address — $49

How deep are wells in and around Dowelltown (37059), Tennessee?

The median drilled well depth in and around Dowelltown (37059) is 118 ft, based on 265 wells with recorded depths in the state TDEC database. Half fall between 80 ft and 175 ft; 90% are shallower than 260 ft.

How much does it cost to drill a well in and around Dowelltown (37059)?

Applying published per-foot rates to the local median depth of 118 ft: drilling and casing alone typically runs $2,950–$7,670; a complete system including pump, pressure tank, and hookup typically runs $7,080–$11,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dowelltown (37059)?

The median static water level is 52 ft below ground surface (middle half of wells: 30 ft–79 ft), from 191 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 88 100–150 ft 70 150–200 ft 39 200–300 ft 34 300–400 ft 19 400–600 ft 4 600+ ft 0
Looking at a specific property in Dowelltown (37059)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dowelltown (37059)

Free. Goes to licensed drillers working Dekalb County.

Part of Dekalb County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.