⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Sumner County › Gallatin (37066)

Gallatin, TN (37066): well depth, water level & drilling cost

✓ 381 TDEC records · Sumner County

160 ftmedian well depth
85 ft–260 fttypical depth range
35 ftmedian static water level
9 gpmmedian yield (236 tests)

Pull every recorded well near a Gallatin (37066) address — $49

How deep are wells in and around Gallatin (37066), Tennessee?

The median drilled well depth in and around Gallatin (37066) is 160 ft, based on 375 wells with recorded depths in the state TDEC database. Half fall between 85 ft and 260 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Gallatin (37066)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Gallatin (37066)?

The median static water level is 35 ft below ground surface (middle half of wells: 25 ft–60 ft), from 203 measurements.

Drilled depth distribution

0–50 ft 30 50–100 ft 78 100–150 ft 67 150–200 ft 43 200–300 ft 76 300–400 ft 72 400–600 ft 6 600+ ft 3
Looking at a specific property in Gallatin (37066)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Gallatin (37066)

Free. Goes to licensed drillers working Sumner County.

Part of Sumner County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.