⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Sumner County › Portland (37148)

Portland, TN (37148): well depth, water level & drilling cost

✓ 388 TDEC records · Sumner County

85 ftmedian well depth
60 ft–113 fttypical depth range
35 ftmedian static water level
5 gpmmedian yield (306 tests)

Pull every recorded well near a Portland (37148) address — $49

How deep are wells in and around Portland (37148), Tennessee?

The median drilled well depth in and around Portland (37148) is 85 ft, based on 364 wells with recorded depths in the state TDEC database. Half fall between 60 ft and 113 ft; 90% are shallower than 150 ft.

How much does it cost to drill a well in and around Portland (37148)?

Applying published per-foot rates to the local median depth of 85 ft: drilling and casing alone typically runs $2,125–$5,525; a complete system including pump, pressure tank, and hookup typically runs $5,100–$8,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Portland (37148)?

The median static water level is 35 ft below ground surface (middle half of wells: 25 ft–50 ft), from 231 measurements.

Drilled depth distribution

0–50 ft 40 50–100 ft 193 100–150 ft 89 150–200 ft 18 200–300 ft 16 300–400 ft 7 400–600 ft 1 600+ ft 0
Looking at a specific property in Portland (37148)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Portland (37148)

Free. Goes to licensed drillers working Sumner County.

Part of Sumner County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.