⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Macon County › Red Boiling Springs (37150)

Red Boiling Springs, TN (37150): well depth, water level & drilling cost

✓ 255 TDEC records · Macon County

125 ftmedian well depth
88 ft–160 fttypical depth range
55 ftmedian static water level
4 gpmmedian yield (173 tests)

Pull every recorded well near a Red Boiling Springs (37150) address — $49

How deep are wells in and around Red Boiling Springs (37150), Tennessee?

The median drilled well depth in and around Red Boiling Springs (37150) is 125 ft, based on 251 wells with recorded depths in the state TDEC database. Half fall between 88 ft and 160 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Red Boiling Springs (37150)?

Applying published per-foot rates to the local median depth of 125 ft: drilling and casing alone typically runs $3,125–$8,125; a complete system including pump, pressure tank, and hookup typically runs $7,500–$12,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Red Boiling Springs (37150)?

The median static water level is 55 ft below ground surface (middle half of wells: 32 ft–75 ft), from 176 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 65 100–150 ft 88 150–200 ft 51 200–300 ft 30 300–400 ft 7 400–600 ft 0 600+ ft 2
Looking at a specific property in Red Boiling Springs (37150)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Red Boiling Springs (37150)

Free. Goes to licensed drillers working Macon County.

Part of Macon County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.