⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Dickson County › White Bluff (37187)

White Bluff, TN (37187): well depth, water level & drilling cost

✓ 238 TDEC records · Dickson County

150 ftmedian well depth
100 ft–203 fttypical depth range
60 ftmedian static water level
4 gpmmedian yield (197 tests)

Pull every recorded well near a White Bluff (37187) address — $49

How deep are wells in and around White Bluff (37187), Tennessee?

The median drilled well depth in and around White Bluff (37187) is 150 ft, based on 235 wells with recorded depths in the state TDEC database. Half fall between 100 ft and 203 ft; 90% are shallower than 299 ft.

How much does it cost to drill a well in and around White Bluff (37187)?

Applying published per-foot rates to the local median depth of 150 ft: drilling and casing alone typically runs $3,750–$9,750; a complete system including pump, pressure tank, and hookup typically runs $9,000–$15,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around White Bluff (37187)?

The median static water level is 60 ft below ground surface (middle half of wells: 35 ft–78 ft), from 151 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 44 100–150 ft 68 150–200 ft 48 200–300 ft 46 300–400 ft 17 400–600 ft 2 600+ ft 5
Looking at a specific property in White Bluff (37187)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in White Bluff (37187)

Free. Goes to licensed drillers working Dickson County.

Part of Dickson County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.