⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Mcminn County › Delano (37325)

Delano, TN (37325): well depth, water level & drilling cost

✓ 587 TDEC records · Mcminn County

210 ftmedian well depth
165 ft–305 fttypical depth range
40 ftmedian static water level
12 gpmmedian yield (575 tests)

Pull every recorded well near a Delano (37325) address — $49

How deep are wells in and around Delano (37325), Tennessee?

The median drilled well depth in and around Delano (37325) is 210 ft, based on 585 wells with recorded depths in the state TDEC database. Half fall between 165 ft and 305 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Delano (37325)?

Applying published per-foot rates to the local median depth of 210 ft: drilling and casing alone typically runs $5,250–$13,650; a complete system including pump, pressure tank, and hookup typically runs $12,600–$21,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Delano (37325)?

The median static water level is 40 ft below ground surface (middle half of wells: 30 ft–60 ft), from 553 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 17 100–150 ft 100 150–200 ft 102 200–300 ft 205 300–400 ft 96 400–600 ft 50 600+ ft 12
Looking at a specific property in Delano (37325)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Delano (37325)

Free. Goes to licensed drillers working Mcminn County.

Part of Mcminn County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.