⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Mcminn County › Etowah (37331)

Etowah, TN (37331): well depth, water level & drilling cost

✓ 602 TDEC records · Mcminn County

205 ftmedian well depth
145 ft–305 fttypical depth range
40 ftmedian static water level
12 gpmmedian yield (566 tests)

Pull every recorded well near a Etowah (37331) address — $49

How deep are wells in and around Etowah (37331), Tennessee?

The median drilled well depth in and around Etowah (37331) is 205 ft, based on 600 wells with recorded depths in the state TDEC database. Half fall between 145 ft and 305 ft; 90% are shallower than 405 ft.

How much does it cost to drill a well in and around Etowah (37331)?

Applying published per-foot rates to the local median depth of 205 ft: drilling and casing alone typically runs $5,125–$13,325; a complete system including pump, pressure tank, and hookup typically runs $12,300–$20,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Etowah (37331)?

The median static water level is 40 ft below ground surface (middle half of wells: 30 ft–80 ft), from 530 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 17 100–150 ft 136 150–200 ft 105 200–300 ft 170 300–400 ft 101 400–600 ft 55 600+ ft 13
Looking at a specific property in Etowah (37331)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Etowah (37331)

Free. Goes to licensed drillers working Mcminn County.

Part of Mcminn County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.