⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Coffee County › Hillsboro (37342)

Hillsboro, TN (37342): well depth, water level & drilling cost

✓ 279 TDEC records · Coffee County

90 ftmedian well depth
75 ft–117 fttypical depth range
45 ftmedian static water level
24 gpmmedian yield (255 tests)

Pull every recorded well near a Hillsboro (37342) address — $49

How deep are wells in and around Hillsboro (37342), Tennessee?

The median drilled well depth in and around Hillsboro (37342) is 90 ft, based on 274 wells with recorded depths in the state TDEC database. Half fall between 75 ft and 117 ft; 90% are shallower than 159 ft.

How much does it cost to drill a well in and around Hillsboro (37342)?

Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hillsboro (37342)?

The median static water level is 45 ft below ground surface (middle half of wells: 30 ft–60 ft), from 245 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 146 100–150 ft 95 150–200 ft 20 200–300 ft 7 300–400 ft 1 400–600 ft 1 600+ ft 0
Looking at a specific property in Hillsboro (37342)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hillsboro (37342)

Free. Goes to licensed drillers working Coffee County.

Part of Coffee County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.