⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Bledsoe County › Pikeville (37367)

Pikeville, TN (37367): well depth, water level & drilling cost

✓ 695 TDEC records · Bledsoe County

208 ftmedian well depth
142 ft–302 fttypical depth range
60 ftmedian static water level
10 gpmmedian yield (668 tests)

Pull every recorded well near a Pikeville (37367) address — $49

How deep are wells in and around Pikeville (37367), Tennessee?

The median drilled well depth in and around Pikeville (37367) is 208 ft, based on 688 wells with recorded depths in the state TDEC database. Half fall between 142 ft and 302 ft; 90% are shallower than 412 ft.

How much does it cost to drill a well in and around Pikeville (37367)?

Applying published per-foot rates to the local median depth of 208 ft: drilling and casing alone typically runs $5,200–$13,520; a complete system including pump, pressure tank, and hookup typically runs $12,480–$20,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pikeville (37367)?

The median static water level is 60 ft below ground surface (middle half of wells: 35 ft–94 ft), from 581 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 56 100–150 ft 136 150–200 ft 111 200–300 ft 194 300–400 ft 102 400–600 ft 73 600+ ft 15
Looking at a specific property in Pikeville (37367)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pikeville (37367)

Free. Goes to licensed drillers working Bledsoe County.

Part of Bledsoe County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.