⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Mcminn County › Riceville (37370)

Riceville, TN (37370): well depth, water level & drilling cost

✓ 556 TDEC records · Mcminn County

250 ftmedian well depth
185 ft–400 fttypical depth range
50 ftmedian static water level
10 gpmmedian yield (535 tests)

Pull every recorded well near a Riceville (37370) address — $49

How deep are wells in and around Riceville (37370), Tennessee?

The median drilled well depth in and around Riceville (37370) is 250 ft, based on 555 wells with recorded depths in the state TDEC database. Half fall between 185 ft and 400 ft; 90% are shallower than 505 ft.

How much does it cost to drill a well in and around Riceville (37370)?

Applying published per-foot rates to the local median depth of 250 ft: drilling and casing alone typically runs $6,250–$16,250; a complete system including pump, pressure tank, and hookup typically runs $15,000–$25,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Riceville (37370)?

The median static water level is 50 ft below ground surface (middle half of wells: 30 ft–80 ft), from 507 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 11 100–150 ft 87 150–200 ft 70 200–300 ft 149 300–400 ft 90 400–600 ft 114 600+ ft 31
Looking at a specific property in Riceville (37370)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Riceville (37370)

Free. Goes to licensed drillers working Mcminn County.

Part of Mcminn County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.