⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Rhea County › Spring City (37381)

Spring City, TN (37381): well depth, water level & drilling cost

✓ 270 TDEC records · Rhea County

208 ftmedian well depth
142 ft–310 fttypical depth range
44 ftmedian static water level
10 gpmmedian yield (233 tests)

Pull every recorded well near a Spring City (37381) address — $49

How deep are wells in and around Spring City (37381), Tennessee?

The median drilled well depth in and around Spring City (37381) is 208 ft, based on 266 wells with recorded depths in the state TDEC database. Half fall between 142 ft and 310 ft; 90% are shallower than 450 ft.

How much does it cost to drill a well in and around Spring City (37381)?

Applying published per-foot rates to the local median depth of 208 ft: drilling and casing alone typically runs $5,200–$13,520; a complete system including pump, pressure tank, and hookup typically runs $12,480–$20,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Spring City (37381)?

The median static water level is 44 ft below ground surface (middle half of wells: 24 ft–84 ft), from 224 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 29 100–150 ft 35 150–200 ft 42 200–300 ft 72 300–400 ft 36 400–600 ft 35 600+ ft 8
Looking at a specific property in Spring City (37381)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Spring City (37381)

Free. Goes to licensed drillers working Rhea County.

Part of Rhea County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.