⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Washington County › Fall Branch (37656)

Fall Branch, TN (37656): well depth, water level & drilling cost

✓ 310 TDEC records · Washington County

279 ftmedian well depth
178 ft–405 fttypical depth range
50 ftmedian static water level
9 gpmmedian yield (293 tests)

Pull every recorded well near a Fall Branch (37656) address — $49

How deep are wells in and around Fall Branch (37656), Tennessee?

The median drilled well depth in and around Fall Branch (37656) is 279 ft, based on 308 wells with recorded depths in the state TDEC database. Half fall between 178 ft and 405 ft; 90% are shallower than 555 ft.

How much does it cost to drill a well in and around Fall Branch (37656)?

Applying published per-foot rates to the local median depth of 279 ft: drilling and casing alone typically runs $6,975–$18,135; a complete system including pump, pressure tank, and hookup typically runs $16,740–$27,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Fall Branch (37656)?

The median static water level is 50 ft below ground surface (middle half of wells: 30 ft–80 ft), from 247 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 11 100–150 ft 44 150–200 ft 31 200–300 ft 72 300–400 ft 67 400–600 ft 54 600+ ft 27
Looking at a specific property in Fall Branch (37656)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Fall Branch (37656)

Free. Goes to licensed drillers working Washington County.

Part of Washington County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.