⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Cocke County › Del Rio (37727)

Del Rio, TN (37727): well depth, water level & drilling cost

✓ 395 TDEC records · Cocke County

285 ftmedian well depth
170 ft–418 fttypical depth range
50 ftmedian static water level
10 gpmmedian yield (375 tests)

Pull every recorded well near a Del Rio (37727) address — $49

How deep are wells in and around Del Rio (37727), Tennessee?

The median drilled well depth in and around Del Rio (37727) is 285 ft, based on 395 wells with recorded depths in the state TDEC database. Half fall between 170 ft and 418 ft; 90% are shallower than 579 ft.

How much does it cost to drill a well in and around Del Rio (37727)?

Applying published per-foot rates to the local median depth of 285 ft: drilling and casing alone typically runs $7,125–$18,525; a complete system including pump, pressure tank, and hookup typically runs $17,100–$28,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Del Rio (37727)?

The median static water level is 50 ft below ground surface (middle half of wells: 20 ft–100 ft), from 357 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 9 100–150 ft 45 150–200 ft 68 200–300 ft 83 300–400 ft 75 400–600 ft 74 600+ ft 39
Looking at a specific property in Del Rio (37727)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Del Rio (37727)

Free. Goes to licensed drillers working Cocke County.

Part of Cocke County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.