⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Jefferson County › Jefferson City (37760)

Jefferson City, TN (37760): well depth, water level & drilling cost

✓ 298 TDEC records · Jefferson County

320 ftmedian well depth
210 ft–487 fttypical depth range
90 ftmedian static water level
12 gpmmedian yield (279 tests)

Pull every recorded well near a Jefferson City (37760) address — $49

How deep are wells in and around Jefferson City (37760), Tennessee?

The median drilled well depth in and around Jefferson City (37760) is 320 ft, based on 292 wells with recorded depths in the state TDEC database. Half fall between 210 ft and 487 ft; 90% are shallower than 605 ft.

How much does it cost to drill a well in and around Jefferson City (37760)?

Applying published per-foot rates to the local median depth of 320 ft: drilling and casing alone typically runs $8,000–$20,800; a complete system including pump, pressure tank, and hookup typically runs $19,200–$32,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Jefferson City (37760)?

The median static water level is 90 ft below ground surface (middle half of wells: 50 ft–127 ft), from 240 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 2 100–150 ft 15 150–200 ft 42 200–300 ft 65 300–400 ft 56 400–600 ft 76 600+ ft 36
Looking at a specific property in Jefferson City (37760)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Jefferson City (37760)

Free. Goes to licensed drillers working Jefferson County.

Part of Jefferson County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.