⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Roane County › Kingston (37763)

Kingston, TN (37763): well depth, water level & drilling cost

✓ 495 TDEC records · Roane County

290 ftmedian well depth
175 ft–405 fttypical depth range
58 ftmedian static water level
7 gpmmedian yield (448 tests)

Pull every recorded well near a Kingston (37763) address — $49

How deep are wells in and around Kingston (37763), Tennessee?

The median drilled well depth in and around Kingston (37763) is 290 ft, based on 485 wells with recorded depths in the state TDEC database. Half fall between 175 ft and 405 ft; 90% are shallower than 573 ft.

How much does it cost to drill a well in and around Kingston (37763)?

Applying published per-foot rates to the local median depth of 290 ft: drilling and casing alone typically runs $7,250–$18,850; a complete system including pump, pressure tank, and hookup typically runs $17,400–$29,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kingston (37763)?

The median static water level is 58 ft below ground surface (middle half of wells: 32 ft–90 ft), from 432 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 27 100–150 ft 66 150–200 ft 40 200–300 ft 105 300–400 ft 99 400–600 ft 98 600+ ft 42
Looking at a specific property in Kingston (37763)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kingston (37763)

Free. Goes to licensed drillers working Roane County.

Part of Roane County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.