⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Mcminn County › Niota (37826)

Niota, TN (37826): well depth, water level & drilling cost

✓ 855 TDEC records · Mcminn County

265 ftmedian well depth
190 ft–401 fttypical depth range
60 ftmedian static water level
10 gpmmedian yield (828 tests)

Pull every recorded well near a Niota (37826) address — $49

How deep are wells in and around Niota (37826), Tennessee?

The median drilled well depth in and around Niota (37826) is 265 ft, based on 852 wells with recorded depths in the state TDEC database. Half fall between 190 ft and 401 ft; 90% are shallower than 505 ft.

How much does it cost to drill a well in and around Niota (37826)?

Applying published per-foot rates to the local median depth of 265 ft: drilling and casing alone typically runs $6,625–$17,225; a complete system including pump, pressure tank, and hookup typically runs $15,900–$26,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Niota (37826)?

The median static water level is 60 ft below ground surface (middle half of wells: 37 ft–95 ft), from 809 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 11 100–150 ft 96 150–200 ft 107 200–300 ft 239 300–400 ft 164 400–600 ft 175 600+ ft 57
Looking at a specific property in Niota (37826)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Niota (37826)

Free. Goes to licensed drillers working Mcminn County.

Part of Mcminn County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.