⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Roane County › Rockwood (37854)

Rockwood, TN (37854): well depth, water level & drilling cost

✓ 213 TDEC records · Roane County

179 ftmedian well depth
120 ft–304 fttypical depth range
45 ftmedian static water level
10 gpmmedian yield (190 tests)

Pull every recorded well near a Rockwood (37854) address — $49

How deep are wells in and around Rockwood (37854), Tennessee?

The median drilled well depth in and around Rockwood (37854) is 179 ft, based on 210 wells with recorded depths in the state TDEC database. Half fall between 120 ft and 304 ft; 90% are shallower than 426 ft.

How much does it cost to drill a well in and around Rockwood (37854)?

Applying published per-foot rates to the local median depth of 179 ft: drilling and casing alone typically runs $4,475–$11,635; a complete system including pump, pressure tank, and hookup typically runs $10,740–$17,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Rockwood (37854)?

The median static water level is 45 ft below ground surface (middle half of wells: 30 ft–70 ft), from 157 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 20 100–150 ft 52 150–200 ft 32 200–300 ft 39 300–400 ft 26 400–600 ft 23 600+ ft 11
Looking at a specific property in Rockwood (37854)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Rockwood (37854)

Free. Goes to licensed drillers working Roane County.

Part of Roane County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.