⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Hancock County › Sneedville (37869)

Sneedville, TN (37869): well depth, water level & drilling cost

✓ 747 TDEC records · Hancock County

265 ftmedian well depth
180 ft–400 fttypical depth range
80 ftmedian static water level
5 gpmmedian yield (698 tests)

Pull every recorded well near a Sneedville (37869) address — $49

How deep are wells in and around Sneedville (37869), Tennessee?

The median drilled well depth in and around Sneedville (37869) is 265 ft, based on 741 wells with recorded depths in the state TDEC database. Half fall between 180 ft and 400 ft; 90% are shallower than 505 ft.

How much does it cost to drill a well in and around Sneedville (37869)?

Applying published per-foot rates to the local median depth of 265 ft: drilling and casing alone typically runs $6,625–$17,225; a complete system including pump, pressure tank, and hookup typically runs $15,900–$26,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sneedville (37869)?

The median static water level is 80 ft below ground surface (middle half of wells: 36 ft–140 ft), from 691 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 14 100–150 ft 119 150–200 ft 96 200–300 ft 182 300–400 ft 131 400–600 ft 151 600+ ft 46
Looking at a specific property in Sneedville (37869)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sneedville (37869)

Free. Goes to licensed drillers working Hancock County.

Part of Hancock County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.