⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Roane County › Ten Mile (37880)

Ten Mile, TN (37880): well depth, water level & drilling cost

✓ 461 TDEC records · Roane County

250 ftmedian well depth
162 ft–350 fttypical depth range
50 ftmedian static water level
9 gpmmedian yield (432 tests)

Pull every recorded well near a Ten Mile (37880) address — $49

How deep are wells in and around Ten Mile (37880), Tennessee?

The median drilled well depth in and around Ten Mile (37880) is 250 ft, based on 452 wells with recorded depths in the state TDEC database. Half fall between 162 ft and 350 ft; 90% are shallower than 474 ft.

How much does it cost to drill a well in and around Ten Mile (37880)?

Applying published per-foot rates to the local median depth of 250 ft: drilling and casing alone typically runs $6,250–$16,250; a complete system including pump, pressure tank, and hookup typically runs $15,000–$25,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Ten Mile (37880)?

The median static water level is 50 ft below ground surface (middle half of wells: 30 ft–81 ft), from 410 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 22 100–150 ft 76 150–200 ft 49 200–300 ft 128 300–400 ft 87 400–600 ft 72 600+ ft 15
Looking at a specific property in Ten Mile (37880)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Ten Mile (37880)

Free. Goes to licensed drillers working Roane County.

Part of Roane County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.