⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Gibson County › Milan (38358)

Milan, TN (38358): well depth, water level & drilling cost

✓ 265 TDEC records · Gibson County

140 ftmedian well depth
120 ft–168 fttypical depth range
70 ftmedian static water level
12 gpmmedian yield (230 tests)

Pull every recorded well near a Milan (38358) address — $49

How deep are wells in and around Milan (38358), Tennessee?

The median drilled well depth in and around Milan (38358) is 140 ft, based on 263 wells with recorded depths in the state TDEC database. Half fall between 120 ft and 168 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Milan (38358)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Milan (38358)?

The median static water level is 70 ft below ground surface (middle half of wells: 50 ft–90 ft), from 240 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 21 100–150 ft 121 150–200 ft 91 200–300 ft 28 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Milan (38358)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Milan (38358)

Free. Goes to licensed drillers working Gibson County.

Part of Gibson County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.