⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Hardin County › Pickwick Dam (38365)

Pickwick Dam, TN (38365): well depth, water level & drilling cost

✓ 122 TDEC records · Hardin County

160 ftmedian well depth
125 ft–227 fttypical depth range
80 ftmedian static water level
10 gpmmedian yield (105 tests)

Pull every recorded well near a Pickwick Dam (38365) address — $49

How deep are wells in and around Pickwick Dam (38365), Tennessee?

The median drilled well depth in and around Pickwick Dam (38365) is 160 ft, based on 121 wells with recorded depths in the state TDEC database. Half fall between 125 ft and 227 ft; 90% are shallower than 430 ft.

How much does it cost to drill a well in and around Pickwick Dam (38365)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pickwick Dam (38365)?

The median static water level is 80 ft below ground surface (middle half of wells: 60 ft–100 ft), from 67 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 13 100–150 ft 36 150–200 ft 23 200–300 ft 25 300–400 ft 7 400–600 ft 8 600+ ft 7
Looking at a specific property in Pickwick Dam (38365)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pickwick Dam (38365)

Free. Goes to licensed drillers working Hardin County.

Part of Hardin County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.