⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Maury County › Santa Fe (38482)

Santa Fe, TN (38482): well depth, water level & drilling cost

✓ 648 TDEC records · Maury County

198 ftmedian well depth
140 ft–300 fttypical depth range
60 ftmedian static water level
4 gpmmedian yield (489 tests)

Pull every recorded well near a Santa Fe (38482) address — $49

How deep are wells in and around Santa Fe (38482), Tennessee?

The median drilled well depth in and around Santa Fe (38482) is 198 ft, based on 640 wells with recorded depths in the state TDEC database. Half fall between 140 ft and 300 ft; 90% are shallower than 410 ft.

How much does it cost to drill a well in and around Santa Fe (38482)?

Applying published per-foot rates to the local median depth of 198 ft: drilling and casing alone typically runs $4,950–$12,870; a complete system including pump, pressure tank, and hookup typically runs $11,880–$19,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Santa Fe (38482)?

The median static water level is 60 ft below ground surface (middle half of wells: 40 ft–90 ft), from 349 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 58 100–150 ft 139 150–200 ft 115 200–300 ft 143 300–400 ft 105 400–600 ft 36 600+ ft 36
Looking at a specific property in Santa Fe (38482)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Santa Fe (38482)

Free. Goes to licensed drillers working Maury County.

Part of Maury County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.