⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Maury County › Williamsport (38487)

Williamsport, TN (38487): well depth, water level & drilling cost

✓ 199 TDEC records · Maury County

229 ftmedian well depth
145 ft–391 fttypical depth range
70 ftmedian static water level
5 gpmmedian yield (165 tests)

Pull every recorded well near a Williamsport (38487) address — $49

How deep are wells in and around Williamsport (38487), Tennessee?

The median drilled well depth in and around Williamsport (38487) is 229 ft, based on 198 wells with recorded depths in the state TDEC database. Half fall between 145 ft and 391 ft; 90% are shallower than 1,000 ft.

How much does it cost to drill a well in and around Williamsport (38487)?

Applying published per-foot rates to the local median depth of 229 ft: drilling and casing alone typically runs $5,725–$14,885; a complete system including pump, pressure tank, and hookup typically runs $13,740–$22,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Williamsport (38487)?

The median static water level is 70 ft below ground surface (middle half of wells: 40 ft–106 ft), from 116 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 14 100–150 ft 34 150–200 ft 23 200–300 ft 47 300–400 ft 28 400–600 ft 16 600+ ft 32
Looking at a specific property in Williamsport (38487)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Williamsport (38487)

Free. Goes to licensed drillers working Maury County.

Part of Maury County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.