⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Overton County › Crawford (38554)

Crawford, TN (38554): well depth, water level & drilling cost

✓ 186 TDEC records · Overton County

230 ftmedian well depth
150 ft–310 fttypical depth range
60 ftmedian static water level
4 gpmmedian yield (159 tests)

Pull every recorded well near a Crawford (38554) address — $49

How deep are wells in and around Crawford (38554), Tennessee?

The median drilled well depth in and around Crawford (38554) is 230 ft, based on 182 wells with recorded depths in the state TDEC database. Half fall between 150 ft and 310 ft; 90% are shallower than 398 ft.

How much does it cost to drill a well in and around Crawford (38554)?

Applying published per-foot rates to the local median depth of 230 ft: drilling and casing alone typically runs $5,750–$14,950; a complete system including pump, pressure tank, and hookup typically runs $13,800–$23,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Crawford (38554)?

The median static water level is 60 ft below ground surface (middle half of wells: 38 ft–131 ft), from 111 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 10 100–150 ft 34 150–200 ft 27 200–300 ft 46 300–400 ft 45 400–600 ft 14 600+ ft 5
Looking at a specific property in Crawford (38554)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Crawford (38554)

Free. Goes to licensed drillers working Overton County.

Part of Overton County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.