⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Stewart County › Dover (37058)

Dover, TN (37058): well depth, water level & drilling cost

✓ 608 TDEC records · Stewart County

180 ftmedian well depth
105 ft–260 fttypical depth range
58 ftmedian static water level
15 gpmmedian yield (452 tests)

Pull every recorded well near a Dover (37058) address — $49

How deep are wells in and around Dover (37058), Tennessee?

The median drilled well depth in and around Dover (37058) is 180 ft, based on 571 wells with recorded depths in the state TDEC database. Half fall between 105 ft and 260 ft; 90% are shallower than 385 ft.

How much does it cost to drill a well in and around Dover (37058)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dover (37058)?

The median static water level is 58 ft below ground surface (middle half of wells: 20 ft–92 ft), from 350 measurements.

Drilled depth distribution

0–50 ft 60 50–100 ft 66 100–150 ft 91 150–200 ft 99 200–300 ft 141 300–400 ft 58 400–600 ft 53 600+ ft 3
Looking at a specific property in Dover (37058)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dover (37058)

Free. Goes to licensed drillers working Stewart County.

Part of Stewart County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.