⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Stewart County

Stewart County, Tennessee: well depth, water level & drilling cost

✓ 2,943 TDEC records · verified 2026-09-28

185 ftmedian well depth
115 ft–290 fttypical depth range
52 ftmedian static water level
10 gpmmedian yield (2,446 tests)

Pull every recorded well near a Stewart County address — $49

How deep are wells in Stewart County, Tennessee?

The median drilled well depth in Stewart County is 185 ft, based on 2,845 wells with recorded depths in the state TDEC database. Half of all wells fall between 115 ft and 290 ft; 90% are shallower than 394 ft. Wells drilled since 2016 have a median depth of 245 ft.

How much does it cost to drill a well in Stewart County?

Applying published per-foot rates to the local median depth of 245 ft: drilling and casing alone typically runs $6,125–$15,925; a complete system including pump, pressure tank, and hookup typically runs $14,700–$24,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Stewart County?

The median static water level is 52 ft below ground surface (middle half of wells: 22 ft–92 ft), from 1,376 measurements.

How much water do wells in Stewart County produce?

The median tested yield is 10 gpm (middle half: 3 gpm–20 gpm), from 2,446 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 189 50–100 ft 359 100–150 ft 517 150–200 ft 427 200–300 ft 655 300–400 ft 415 400–600 ft 252 600+ ft 31
Looking at a specific property in Stewart County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Stewart County

Free. Goes to licensed drillers working Stewart County.

Well records by ZIP code in Stewart County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.