⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Stewart County › Indian Mound (37079)

Indian Mound, TN (37079): well depth, water level & drilling cost

✓ 377 TDEC records · Stewart County

260 ftmedian well depth
180 ft–328 fttypical depth range
82 ftmedian static water level
7 gpmmedian yield (348 tests)

Pull every recorded well near a Indian Mound (37079) address — $49

How deep are wells in and around Indian Mound (37079), Tennessee?

The median drilled well depth in and around Indian Mound (37079) is 260 ft, based on 371 wells with recorded depths in the state TDEC database. Half fall between 180 ft and 328 ft; 90% are shallower than 407 ft.

How much does it cost to drill a well in and around Indian Mound (37079)?

Applying published per-foot rates to the local median depth of 260 ft: drilling and casing alone typically runs $6,500–$16,900; a complete system including pump, pressure tank, and hookup typically runs $15,600–$26,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Indian Mound (37079)?

The median static water level is 82 ft below ground surface (middle half of wells: 41 ft–105 ft), from 211 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 23 100–150 ft 38 150–200 ft 42 200–300 ft 114 300–400 ft 92 400–600 ft 49 600+ ft 5
Looking at a specific property in Indian Mound (37079)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Indian Mound (37079)

Free. Goes to licensed drillers working Stewart County.

Part of Stewart County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.