⟁ Tennessee Well Data field records · 2026 survey

Tennessee Well Data › Stewart County › Stewart (37175)

Stewart, TN (37175): well depth, water level & drilling cost

✓ 526 TDEC records · Stewart County

140 ftmedian well depth
92 ft–212 fttypical depth range
40 ftmedian static water level
15 gpmmedian yield (457 tests)

Pull every recorded well near a Stewart (37175) address — $49

How deep are wells in and around Stewart (37175), Tennessee?

The median drilled well depth in and around Stewart (37175) is 140 ft, based on 517 wells with recorded depths in the state TDEC database. Half fall between 92 ft and 212 ft; 90% are shallower than 305 ft.

How much does it cost to drill a well in and around Stewart (37175)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Stewart (37175)?

The median static water level is 40 ft below ground surface (middle half of wells: 21 ft–70 ft), from 269 measurements.

Drilled depth distribution

0–50 ft 29 50–100 ft 112 100–150 ft 132 150–200 ft 75 200–300 ft 97 300–400 ft 52 400–600 ft 17 600+ ft 3
Looking at a specific property in Stewart (37175)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Stewart (37175)

Free. Goes to licensed drillers working Stewart County.

Part of Stewart County well records.

Method: medians computed from TDEC records (TDEC reported water wells; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.